[AMD] DC3s

I didnt mean to start an argument.Entex was an importer in this country.The moulds were Nitto.I am comparing 2 built ups,so it is hard to measure.The ATP kit is slightly longer,by maybe 1/8 inch.The wing span is maybe 1/32 longer on the Nitto kit.The wings are also placed slightly more forward on the fuselage on the Nitto kit,same as the Minicraft.Both were advertised as 1/100.Most Nitto kits were 1/100.Lincoln/IM/Kader were all different scales.The Connie which was a copy,but not completely of the old Hawk kit was 1/140.The F27 and Viscount were around 1/120.The DC7C and Brittania were about 1/160.
Sparky

------------------------------------

To Post a message, send it to: airlinermodelling@yahooGroups.com

To Unsubscribe, send a blank message to: airlinermodelling-unsubscribe@yahooGroups.com
home pages:
http://groups.yahoo.com/group/airlinermodelling
http://amd.zveza-zgpms.si/
Photos of your models in .jpg format (less than 100K size)? send to: blaz.selih@email.si
Moderators:
Niels Sampath at: niels@north-star.fsnet.co.uk
and Paul Matthews:

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/airlinermodelling/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/airlinermodelling/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:airlinermodelling-digest@yahoogroups.com
mailto:airlinermodelling-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
airlinermodelling-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/